Single-stage vertical centrifugal pumps, suitable for transfer, recycling and distributing
corrosive liquids. The AS-series pumps are recommended for installation in cisterns, tanks or wells with variable head. The manufacturing technologies, the materials employed and the hydraulic design adopted permit the vertical AS pumps to satisfy plant specifications for
chemical products (including those with solids). Hydraulics are optimized using
open, closed and recessed impellers, and impellers with different speeds of rotation in accordance with the constraints imposed by the plants, the nature of the liquids or the working processes.
Characteristics- Materials: PP, PVC, PVDF, PE-HD.
- Up to 3 meters long, depending upon the tank depth.
- Suitable dimensioning of shafts, support columns and motor supports.
- Standard sized PVC support flanges and bases or customized in accordance with design.
- Nozzles with hose adaptor threaded or flanged.
- Thickly coated cantilever shaft, fit directly onto the motor shaft. Free of bearing bracket or intermediate bearings, it is guided by a pair of filled PTFE, ceramic or SiC wear bushings, and flushed by the liquid being pumped.
- Pumps longer than 1950 mm: a variation is constructed that ensures exceptional resistance to vibrations and that anticipates over-sizing of the shaft and the motor support, in addition to an FRP reinforcing structure.
PUMP CURVES
IMPORTANT
Plastic pumps do not allow dry operation.
SAVINO BARBERA SRL
Via Torino 12
P.O. Box 58
10032 Brandizzo (To)
ITALY
P.IVA 00520820010
R.I.TO 272-1974-2166
REA 489443
Cap. soc. 48000 i.v.
Tel +39 011 913.90.63
Fax +39 011 913.73.1
|
®2005-2013 Savino Barbera srl - All rights reserved by