Drum pumps

The portable FUS pumps are designed for transferring chemical products (non-abrasive and non-viscous) contained in drums or barrels. Because of their easy handling, they are widely used also for applications such as sampling pumps, for drainage or for emergency services. Convenient and safe to use, FUS drum pumps are constructed of three materials (PP, PVDF and AISI) and two motor systems: single-phase electric or pneumatic.
The single-phase electric motor with double insulation (complete with mains cable and handlepiece) allows discontinuous use of the pump. The pneumatic model instead permits heavier and more continuous use.
Compatibly with the chemical resistance of the construction materials, FUS pumps are appropriate for use with liquids free of abrasive suspended solids at ambient temperature with a specific gravity up to 1.8 and viscosity up to 14 cps. They are not instead appropriate for flammable liquids or for use in areas with a potentially explosive atmosphere.






General characteristics

• Construction materials: PP, PVDF, AISI
• Maximum capacity: 80 l/min
• Maximum delivery head: 10 m
• Suction pipe: 900 and 1200 mm with ? from 40 to 42.5 mm.

Key

1. Impeller
2. Length: 900/1200 mm, depending on the models.
3. Motor: single-phase electric or pneumatic.
4. Total pump weight: from 3.5 to 7.5 kg, depending on the models.

Drum pump Technical data

Model	PP mono	PP pneu	SS mono	SS pneu	TR mono	TR pneu
Material	PP	PP	AISI 304	AISI 304	PP - PVDF - AISI 316
Motor	Electrical	Pneumatic	Electrical	Pneumatic	Electrical	Pneumatic
Max flow rate - l/min	50	60	70	50	80	80
Max head - m	10	15	10	10	9	9
Suction tube - mm	900	900	900	900	900 - 1200
Suction tube diameter - mm	42	42	42	42	42-40-40.5
Weight - kg	3.5	4.0	7.0	7.0	3-5-6

IMPORTANT
Plastic pumps do not allow dry operation.

Savino Barbera S.n.c. - Via Torino 12 - 10032 Brandizzo (To) - ITALY
Tel.: (+39) 011-913-9063 - Fax: (+39) 011-913-7313

®2005-2007 Vernondata - All rights reserved