The portable FUS pumps
are designed for transferring chemical products
(non-abrasive and non-viscous) contained in drums or barrels
. Because of their easy handling, they are widely used also for applications such as sampling pumps, for drainage or for emergency services. Convenient and safe to use, FUS drum pumps
are constructed of three materials (PP, PVDF and AISI
) and two motor systems: single-phase electric or pneumatic.
The single-phase electric motor with double insulation (complete with mains cable and handlepiece) allows discontinuous use of the pump. The pneumatic model instead permits heavier and more continuous use.
Compatibly with the chemical resistance
of the construction materials, FUS pumps are appropriate for use with liquids free of abrasive suspended solids at ambient temperature with a specific gravity up to 1.8 and viscosity up to 14 cps. They are not instead appropriate for flammable liquids or for use in areas with a potentially explosive atmosphere.General characteristics
- Construction materials: PP, PVDF, AISI
- Maximum capacity: 80 l/min
- Maximum delivery head: 10 m
- Suction pipe: 900 and 1200 mm with ? from 40 to 42.5 mm.
- Length: 900/1200 mm, depending on the models.
- Motor: single-phase electric or pneumatic.
- Total pump weight: from 3.5 to 7.5 kg, depending on the models.
Drum pump Technical data
|Material||PP||PP||AISI 304||AISI 304||PP - PVDF - AISI 316|
|Max flow rate - l/min||50||60||70||50||80||80|
|Max head - m||10||15||10||10||9||9|
|Suction tube - mm||900||900||900||900||900 - 1200|
|Suction tube diameter - mm||42||42||42||42||42-40-40.5|
|Weight - kg||3.5||4.0||7.0||7.0||3-5-6|
Plastic pumps do not allow dry operation.