Drum pumps

The portable FUS pumps are designed for transferring chemical products (non-abrasive and non-viscous) contained in drums or barrels. Because of their easy handling, they are widely used also for applications such as sampling pumps, for drainage or for emergency services. Convenient and safe to use, FUS drum pumps are constructed of three materials (PP, PVDF and AISI) and two motor systems: single-phase electric or pneumatic.
The single-phase electric motor with double insulation (complete with mains cable and handlepiece) allows discontinuous use of the pump. The pneumatic model instead permits heavier and more continuous use.
Compatibly with the chemical resistance of the construction materials, FUS pumps are appropriate for use with liquids free of abrasive suspended solids at ambient temperature with a specific gravity up to 1.8 and viscosity up to 14 cps. They are not instead appropriate for flammable liquids or for use in areas with a potentially explosive atmosphere.

General characteristics
Drum pump

  1. Impeller
  2. Length: 900/1200 mm, depending on the models.
  3. Motor: single-phase electric or pneumatic.
  4. Total pump weight: from 3.5 to 7.5 kg, depending on the models.

Drum pump Technical data

ModelPP mono
PP mono
PP pneu
PP pneu
SS mono
SS mono
SS pneu
SS pneu
TR mono
TR mono
TR pneu
TR pneu
MaterialPPPPAISI 304AISI 304PP - PVDF - AISI 316
Max flow rate - l/min506070508080
Max head - m1015101099
Suction tube - mm900900900900900 - 1200
Suction tube diameter - mm4242424242-40-40.5
Weight - kg3.

Plastic pumps do not allow dry operation.

Printer-friendly page

SAVINO BARBERA SRL Via Torino 12 P.O. Box 58 10032 Brandizzo (To) ITALY
P.IVA 00520820010 R.I.TO 272-1974-2166 REA 489443 Cap. soc. 48000€ i.v.

Tel +39 011 913.90.63 Fax +39 011 913.73.1            PRIVACY |  ®2005-2012 Web Creare - All rights reserved